DSL Actiontec 1520/1524 Setup

From XMission Wiki
Revision as of 13:46, 6 June 2019 by Jab (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Archives.png


  1. Launch the Autorun program from the install CD (if it does not AutoRun).
  2. Follow the instructions on the screen untill it asks you to select an ISP protocol.
  3. Select PPPoA under Please select ISP protocol.
  4. Click Next.
    Bdy-prot.jpg
  5. Type your XMission username under User ID.
  6. Type your XMission password under Password.
  7. Click Next.
    Bdy-act.jpg
  8. Select Dynamic IP (DHCP).
  9. Click Next.
    Bdy-ip.jpg
  10. Click Finish.
    Bdy-done.jpg

Remember, if you ever change your XMission password, you'll need to update your password in the Actiontec] as well. If you purchased a multiple IP block, you may configure it now