Difference between revisions of "DSL Actiontec M1000 Multiple IP Setup"

From XMission Wiki
Jump to: navigation, search
m (New page: #Open your web browser and enter <tt>192.168.0.1</tt> in the address bar. #Click on the <span class="button">Advanced Setup</span> tab. #Under the '''IP Addressing''' section, click <span ...)
 
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
#Open your web browser and enter <tt>192.168.0.1</tt> in the address bar.
+
{{archived}}
 +
 
 +
#Open your web browser and go to http://192.168.0.1
 
#Click on the <span class="button">Advanced Setup</span> tab.
 
#Click on the <span class="button">Advanced Setup</span> tab.
 
#Under the '''IP Addressing''' section, click <span class="button">WAN IP Address</span>, on the warning screen, click <span class="button">Yes</span>.
 
#Under the '''IP Addressing''' section, click <span class="button">WAN IP Address</span>, on the warning screen, click <span class="button">Yes</span>.
 
#Fill in the information requested as show in the screenshot below
 
#Fill in the information requested as show in the screenshot below
#:http://www.xmission.com/help/screenshots/actiontec/m1000subnet.png  
+
#:[[Image:m1000subnet.png]]
 
#Click <span class="button">Apply</span>
 
#Click <span class="button">Apply</span>
  
 
Once the DSL and Internet lights are solid you may use your Internet Connection.
 
Once the DSL and Internet lights are solid you may use your Internet Connection.
 +
 +
 +
[[Category:DSL Troubleshooting|Actiontec M1000 Multiple IP]]
 +
[[Category:DSL]]
 +
[[Category:PPPoA]]

Latest revision as of 13:48, 6 June 2019

Archives.png


  1. Open your web browser and go to http://192.168.0.1
  2. Click on the Advanced Setup tab.
  3. Under the IP Addressing section, click WAN IP Address, on the warning screen, click Yes.
  4. Fill in the information requested as show in the screenshot below
    M1000subnet.png
  5. Click Apply

Once the DSL and Internet lights are solid you may use your Internet Connection.