XMission Wiki - User contributions [en]

Cisco 678 Single

2008-10-28T02:44:01Z

Scratch: New page: Connect to your Cisco 600 series through Hyperterm, Hit enter until you see the following cbos prompt. Then type the following commands. cbos>enable Password:(Hit enter here) cbos#set ...

Connect to your Cisco 600 series through Hyperterm,

Hit enter until you see the following cbos prompt. Then type the following commands.

cbos>enable
Password:(Hit enter here)

cbos#set nvram erase

cbos#write

cbos#reboot

Hello!
Expanding
CBOS image... CBOS [version]

Hit enter to get the cbos prompt

cbos>enable
Password:Hit enter

cbos#set ppp wan0-0 ipcp 0.0.0.0

cbos#set ppp wan0-0 dns 0.0.0.0

cbos#set ppp wan0-0 login (your login name)

cbos#set ppp wan0-0 password (your password)

cbos#set ppp restart enabled

cbos#set dhcp server enabled

cbos#set nat enabled

cbos#set web disabled

cbos#set web port 5000

cbos#set int wan0-0 close

cbos#set int wan0-0 vpi 0

cbos#set int wan0-0 vci 32

cbos#set int wan0-0 open

cbos#write

cbos#reboot

Then you will see

Hello!
Expanding CBOS image...
CBOS [version]

cbos>enable
Password:Hit enter

cbos#set password exec (your password)

cbos#set password enable (your password)

cbos#write

cbos#reboot

Announcement lists

2008-10-16T21:42:56Z

Scratch: mailman announce moderation

First, go to:

http://mailman.xmission.com/mailman/admin/yourlistname

Where "yourlistname" is the name of your mailing list (the part to the left of the @ symbol in the list's email address).

Enter the list administrative password and click the "Let me in" button. Configure the following settings:

Privacy Options >> Subscription Rules

Who can view subscription list? (List admin only)

Privacy Options >> Sender Filters

By default, should new list member postings be moderated? (Yes)

Action to take when a moderated member posts to the list. (Hold)

Action to take for postings from non-members for which no explicit action is defined. (Hold)

Auto-responder settings

Should Mailman send an auto-response to mailing list posters? (Yes)

Auto-response text to send to mailing list posters:
"Sorry, only the site administrator can post to this list."

Number of days between auto-responses: (0)

Membership Management >> Membership List

Set everyone's moderation bit, including those members not currently visible (On)

Now that everyone has their moderation bit on (which means their posts are subject to moderator approval) and "Action to take when a moderated member posts to the list" is Hold, '''''the administrators will have to approve their own posts'''''. You could turn off the moderation bit for moderators' email addresses, but this is not very secure because email addresses can be easily forged.

You can customize these settings as you like, but to prevent unauthorized people from posting to you list, always have their moderation bit(flag) on. You should always keep "By default, should new list member postings be moderated?" set to "Yes" so new members are also moderated.

(Copyright 2000-2008 by Modwest, Inc)

Announcement lists

2008-10-16T21:41:06Z

Scratch: New page: First, go to: http://mailman.xmission.com/mailman/admin/yourlistname Where "yourlistname" is the name of your mailing list (the part to the left of the @ symbol in the list's email addre...