Voicemail

2009-04-22T20:15:06Z

Thehar:

{| style="width:75%"
|-
|style="color:#555555; font-size:11pt"|

[http://vm.xmission.com/ Set up or check your XMission Voicemail]
* Use your full phone number
* Default pin: 7777

[[Category:VoIP]]

DSL 2Wire 2700HG Multiple IP Setup

2007-08-01T21:48:22Z

Thehar:

#Enter <tt>192.168.0.1</tt> in the address bar of your web browser to open the 2-Wire home page. Select Advanced Configuration Settings link in the lower right corner.
#:http://www.xmission.com/help/screenshots/2wire/2wiresubnet_1.png
#Select your Time Zone from the drop-down.
#Select the radio button next to ''PPP Mode''.
#In the ''Connection Type'' drop-down list, select PPPoA then enter your XMission username and password in the spaces provided.
#:http://www.xmission.com/help/screenshots/2wire/2wiresubnet_2.png
#Under the ''Addressing'' area, select Unnumbered Mode.
#In the ''Gateway IP Address'' field, enter the first usable IP address in the subnet assigned to you.
#In the ''Subnet Mask'' field, enter the subnet mask you were given.
#:http://www.xmission.com/help/screenshots/2wire/2wiresubnet_3.png
#Scroll down the page to the ''DNS Server'' area.
#Select the Specify DNS Server Settings radio button and enter <tt>198.60.22.2</tt> for the ''Primary DNS'' and <tt>198.60.22.22</tt> in the ''Secondary DNS'' field. Then click Save.
#:http://www.xmission.com/help/screenshots/2wire/2wiresubnet_4.png
#Click on Home. Then click on the Home Network image.
#:http://www.xmission.com/help/screenshots/2wire/2wiresubnet_5.png
#From Home Network click on Advanced Settings
'''Note''': Ensure that the machine you want to specify the public IP to is connected successfully to the 2wire modem.
#In the ''Device List'' section, click on Edit Address Allocation
#Find the correct computer or device you are attempting to map a static IP address to. Select ''DHCP Public: <public ip address>'' from the drop down menu next to the device.
#:http://www.xmission.com/help/screenshots/2wire/2wiresubnet_6.png
#After you have finished assigning all the devices you would like to have static IPs, click on Save.
#After saving changes to the ''Address Allocation Settings'', ensure the device you assigned the address to is utilizing DHCP to lease an address.
'''Note''': From here on you can use the built-in Firewall to forward ports to the device(s).

Your DSL modem should now display a green light on Internet. Your configuration is complete.

XMission Wiki - User contributions [en]

Voicemail

DSL 2Wire 2700HG Multiple IP Setup