View source for DSL Actiontec 1520/1524 Setup

{{Archived}}

XMission Recommends keeping your Actiontec up to date. Read here for more info on how to [[update your actiontec]].


#Launch the Autorun program from the install CD (if it does not AutoRun).
#Follow the instructions on the screen untill it asks you to select an ISP protocol.
#Select <span class="button">PPPoA</span> under <span class="button">Please select ISP protocol</span>.
#Click <span class="button">Next</span>.
#:http://www.xmission.com/help/screenshots/actiontec/bdy-prot.jpg
#Type your XMission username under <span class="button">User ID</span>.
#Type your XMission password under <span class="button">Password</span>.
#Click <span class="button">Next</span>.
#:http://www.xmission.com/help/screenshots/actiontec/bdy-act.jpg
#Select <span class="button">Dynamic IP (DHCP)</span>.
#Click <span class="button">Next</span>.
#:http://www.xmission.com/help/screenshots/actiontec/bdy-ip.jpg
#Click <span class="button">Finish</span>.
#:http://www.xmission.com/help/screenshots/actiontec/bdy-done.jpg
<div class="messagebox metadata">'''Note''': At this point the configuration for your Actiontec is complete. Shortly after the Internet light on your Actiontec becomes solid you should be able to access the Internet.</div>
Remember, if you ever change your XMission password, you'll need to update your password in the Actiontec] as well.
If you purchased a multiple IP block, you may configure it now

[[Category:DSL|Actiontec 1520/1524]]
[[Category:DSL Archives|Actiontec 1520/1524]]