Difference between revisions of "XMission App"

From XMission Wiki
Jump to: navigation, search
(What to do with your Network Scan)
Line 26: Line 26:
 
== What to do with your Network Scan ==
 
== What to do with your Network Scan ==
  
 +
Once you've scanned your home network using our App, you'll be given a rating:
 +
* Very Good
 +
* Good
 +
* Moderate
 +
* Poor
 +
 +
It is recommended to click on "Improve Network Health" no matter what your rating is. As their could still be issues affecting secondary devices not just your phone. We look for four known issues that cause connectivity issues.
 +
# Too many devices
 +
# Congestion on network
 +
# Poor quality inside or outside of the home
 +
# High network utilization
 +
 +
 +
[[File:Self Help.png|200px]]
 +
 +
=== Too many devices ===
 +
 +
While many wireless routers are programmed to support up to approximately 100-150 devices. That doesn't mean you are able to have that many simultaneous connections running at once.
 +
 +
[[File:Too_may_devices_on_network.png|200px]]
 +
 +
If there are more devices with active internet connections than your router can support, it can cause connectivity issues. Disconnecting and turning off devices that are not in use will clear up those issues.
 +
 +
[[File:Too_may_devices_on_network_resolution.png|200px]]
 +
 +
=== Congestion detected on the network ===
 +
 +
 +
=== Poor connection quality inside and outside of the home ===
 +
 +
 +
=== High network utilization detected ===
 +
 +
 +
 
== Send a Photo ==
 
== Send a Photo ==
 +
  
 
== Start a Video Call ==
 
== Start a Video Call ==
 +
  
 
== Router Check ==
 
== Router Check ==

Revision as of 16:57, 12 September 2019

We have created a new mobile App that will allow you and XMission Support in troubleshooting your home network. Including wireless troubleshooting, network congestion, caching/streaming issues, and much more. Using our XMission App you'll be able to increase Wireless Performance and resolve common issues.

This app runs a quick two minute network diagnostic that collects simple data such as Internet Speed and Network Health. It also allows you to upload Photo's, Video's and give a XMission Support Member access to your router with just a few clicks on your mobile device. Our App is available on both Android and iOS

How to perform a Network Scan

  • Once installed, launch the app – If the app asks for permission to access your location please allow it. This enables the app to gather information about the ambient wifi network.
    Allow Access.png
    NOTE The XMission App does not record GPS coordinates, this allows us to gain permission for WiFi Information only.
  • You'll be asked to place your device next to your router or in the area of your home you are experiencing wireless issues.
    Device Placement.png
  • Tap ‘Yes’ on the screen asking if you have moved your device to the correct location
  • Allow the tests to complete, this normally takes up to 2 minutes, however, it could be longer on older devices
    Network Discovery.png
    NOTE Please do not minimize or close out of the app during this step.
  • Once the network scan is completed you'll be shown a result screen that will advise you of your current network health:
    Network HealthGood.png Network HealthBad.png

What to do with your Network Scan

Once you've scanned your home network using our App, you'll be given a rating:

  • Very Good
  • Good
  • Moderate
  • Poor

It is recommended to click on "Improve Network Health" no matter what your rating is. As their could still be issues affecting secondary devices not just your phone. We look for four known issues that cause connectivity issues.

  1. Too many devices
  2. Congestion on network
  3. Poor quality inside or outside of the home
  4. High network utilization


Self Help.png

Too many devices

While many wireless routers are programmed to support up to approximately 100-150 devices. That doesn't mean you are able to have that many simultaneous connections running at once.

Too may devices on network.png

If there are more devices with active internet connections than your router can support, it can cause connectivity issues. Disconnecting and turning off devices that are not in use will clear up those issues.

Too may devices on network resolution.png

Congestion detected on the network

Poor connection quality inside and outside of the home

High network utilization detected

Send a Photo

Start a Video Call

Router Check