Difference between revisions of "WRT54GL Single IP Setup"

Latest revision as of 10:52, 16 January 2014

Connect the Ethernet cable from the UTOPIA Access Portal to the internet port on your Linksys WRT54GL.
Connect an Ethernet cable from the Ethernet port on your computer to one of the lan ports on your Linksys WRT54GL.
Open your web browser, you will most likely get an XMission Welcome screen. In the address bar, type 192.168.1.1 and press the Enter key on your keyboard.
In the Internet Connection Type drop down box, select PPPoE.
In the User Name field, enter your XMission user name.
In the Password field, enter your XMission password.
Click the Save Settings button at the bottom.

Revision as of 11:05, 8 May 2009 (view source) Cyeates (talk \| contribs) ← Older edit		Latest revision as of 10:52, 16 January 2014 (view source) Jab (talk \| contribs)
(2 intermediate revisions by the same user not shown)
Line 9:		Line 9:


−	[[Category:UTOPIA\|WRT54GL Single IP Setup]]	+	[[Category:UTOPIA]]
		+	[[Category:UTOPIA Troubleshooting\|WRT54GL Single IP Setup]]