Difference between revisions of "FreePPP 1.05 Setup"

From XMission Wiki
Jump to: navigation, search
(New page: #Open your Apple menu, go to <span class="button">Control Panels</span>, and select <span class="button">FreePPP</span>. #Set the <span class="button">Port Name:</span> to which port your...)
 
 
(8 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
{{archived}}
 +
 
#Open your Apple menu, go to <span class="button">Control Panels</span>, and select  <span class="button">FreePPP</span>.
 
#Open your Apple menu, go to <span class="button">Control Panels</span>, and select  <span class="button">FreePPP</span>.
 
#Set the <span class="button">Port Name:</span> to which port your modem is on.  
 
#Set the <span class="button">Port Name:</span> to which port your modem is on.  
Line 4: Line 6:
 
#<span class="button">Echo Interval (seconds):</span> should be set to '''Off'''.  
 
#<span class="button">Echo Interval (seconds):</span> should be set to '''Off'''.  
 
#Check <span class="button">Disable Auto Connect</span>, <span class="button">Hangup on Close</span> and <span class="button">Quiet Mode</span>.
 
#Check <span class="button">Disable Auto Connect</span>, <span class="button">Hangup on Close</span> and <span class="button">Quiet Mode</span>.
−
#:http://www.xmission.com/help/screenshots/macos/macfree1051.gif
+
#[[Image:Macfree1051.png]]
 
#Click on <span class="button">Config...</span>.
 
#Click on <span class="button">Config...</span>.
 
#Enter <tt>XMission</tt> into the <span class="button">PPP Server Name:</span> field.  
 
#Enter <tt>XMission</tt> into the <span class="button">PPP Server Name:</span> field.  
Line 10: Line 12:
 
#Enter your local XMission dial-up number in the <span class="button">Phone Num</span> field.
 
#Enter your local XMission dial-up number in the <span class="button">Phone Num</span> field.
 
#Set <span class="button">Modem connect timeout:</span> to '''90 seconds'''.  
 
#Set <span class="button">Modem connect timeout:</span> to '''90 seconds'''.  
−
#:http://www.xmission.com/help/screenshots/macos/macfree1052.gif
+
#[[Image:Macfree1052.png]]
 
#Click on <span class="button">Authentication...</span>.
 
#Click on <span class="button">Authentication...</span>.
 
#Enter your XMission username in the <span class="button">Auth. ID:</span> field
 
#Enter your XMission username in the <span class="button">Auth. ID:</span> field
Line 17: Line 19:
 
#<span class="button">Retries:</span> should at least be set to <tt>1</tt> and the <span class="button">Timeout:</span> should be set to <tt>3</tt> seconds.
 
#<span class="button">Retries:</span> should at least be set to <tt>1</tt> and the <span class="button">Timeout:</span> should be set to <tt>3</tt> seconds.
 
#Click on <span class="button">OK</span>.
 
#Click on <span class="button">OK</span>.
−
#:http://www.xmission.com/help/screenshots/macos/macfree1054.gif
+
#[[Image:Macfree1054.png]]
 
#Click on <span class="button">LCP Options</span>.
 
#Click on <span class="button">LCP Options</span>.
 
#Click on <span class="button">Default Settings</span>.  
 
#Click on <span class="button">Default Settings</span>.  
Line 23: Line 25:
 
#Check <span class="button">Want</span> and <span class="button">Will</span> under the <span class="button">Remote</span> column next to <span class="button">Authentication</span>.
 
#Check <span class="button">Want</span> and <span class="button">Will</span> under the <span class="button">Remote</span> column next to <span class="button">Authentication</span>.
 
#Click on <span class="button">OK</span>.  
 
#Click on <span class="button">OK</span>.  
−
#:http://www.xmission.com/help/screenshots/macos/macfree1055.gif
+
#[[Image:Macfree1055.png]]
 
#Click on <span class="button">IPCP Options...</span>.  
 
#Click on <span class="button">IPCP Options...</span>.  
 
#Click on <span class="button">Default Settings</span>.  
 
#Click on <span class="button">Default Settings</span>.  
 
#Uncheck all boxes next to <span class="button">TCP Header Comp.(VJ)</span>.
 
#Uncheck all boxes next to <span class="button">TCP Header Comp.(VJ)</span>.
 
#Click on <span class="button">OK</span>.  
 
#Click on <span class="button">OK</span>.  
−
#:http://www.xmission.com/help/screenshots/macos/macfree1056.gif
+
#[[Image:Macfree1056.png]]
 
#Click on <span class="button">Done</span>.
 
#Click on <span class="button">Done</span>.
  
−
[[Category:Dialup]]
+
[[Category:Dialup Archives|Free PPP]]
−
[[Category:Macintosh]]
 

Latest revision as of 09:08, 4 February 2014

Archives.png


  1. Open your Apple menu, go to Control Panels, and select FreePPP.
  2. Set the Port Name: to which port your modem is on.
  3. Idle Timeout (minutes): should be set to None.
  4. Echo Interval (seconds): should be set to Off.
  5. Check Disable Auto Connect, Hangup on Close and Quiet Mode.
  6. Macfree1051.png
  7. Click on Config....
  8. Enter XMission into the PPP Server Name: field.
  9. Flow Control: should be set to CTS & RTS (DTR) unless you have a Global Village Modem, then it should be set to CTS Only.
  10. Enter your local XMission dial-up number in the Phone Num field.
  11. Set Modem connect timeout: to 90 seconds.
  12. Macfree1052.png
  13. Click on Authentication....
  14. Enter your XMission username in the Auth. ID: field
  15. Enter your XMission password in the Password: field.
    Note: Your account name and password are case-sensitive.
  16. Retries: should at least be set to 1 and the Timeout: should be set to 3 seconds.
  17. Click on OK.
  18. Macfree1054.png
  19. Click on LCP Options.
  20. Click on Default Settings.
  21. Check all boxes next to Protocol field compression and Addr/cntl field compression.
  22. Check Want and Will under the Remote column next to Authentication.
  23. Click on OK.
  24. Macfree1055.png
  25. Click on IPCP Options....
  26. Click on Default Settings.
  27. Uncheck all boxes next to TCP Header Comp.(VJ).
  28. Click on OK.
  29. Macfree1056.png
  30. Click on Done.
Retrieved from "http://wiki.xmission.com/index.php?title=FreePPP_1.05_Setup&oldid=6227"