Installing RAS in NT: Difference between revisions

From XMission Wiki
Jump to navigation Jump to search
← Older editNewer edit →
Mfrazier (talk | contribs)
1,345 edits
mNo edit summary
Mfrazier (talk | contribs)
1,345 edits
m Protected "Dialup Archives:Installing RAS in NT" [edit=sysop:move=sysop]
(No difference)

Revision as of 20:47, 19 March 2008

  1. Click Start, go to Settings, and select Control Panel.
  2. Double-click on Network.
  3. Select the Services tab.
  4. In the Network Services box, check for Remote Access.
    Note: If you DO see Remote Access in the Network Services box, highlight it, click Properties, and jump to step 9.
    http://www.xmission.com/help/screenshots/winnt/winnt09.gif
  5. Click Add.
  6. Scroll down to Remote Access Service and highlight it.
  7. Click OK.
    http://www.xmission.com/help/screenshots/winnt/winnt10.gif
  8. Insert the Windows NT disk and click Continue.
  9. Select your modem from the menu.
  10. Click OK.
    http://www.xmission.com/help/screenshots/winnt/winnt11.gif
  11. Click Configure.
    http://www.xmission.com/help/screenshots/winnt/winnt12.gif
  12. Select Dial out only.
  13. Click OK.
    http://www.xmission.com/help/screenshots/winnt/winnt13.gif
  14. Click Network.
  15. Make sure TCP/IP is the only protocol selected.
  16. Click OK.
    http://www.xmission.com/help/screenshots/winnt/winnt14.gif
  17. Click Continue.
  18. Click Close.
    Note: Windows NT will update your Bindings Configuration, and then prompt you to reboot your computer. You must reboot.
  19. Click Yes to reboot your computer.


Retrieved from "https://wiki.xmission.com/index.php?title=Installing_RAS_in_NT&oldid=1659"