Difference between revisions of "Installing RAS in NT"

From XMission Wiki
Jump to: navigation, search
m (Protected "Dialup Archives:Installing RAS in NT" [edit=sysop:move=sysop])
Line 1: Line 1:
−
{{archived}}
 
 
#Click <span class="button">Start</span>, go to <span class="button">Settings</span>, and select <span class="button">Control Panel</span>.
 
#Click <span class="button">Start</span>, go to <span class="button">Settings</span>, and select <span class="button">Control Panel</span>.
 
#Double-click on <span class="button">Network</span>.
 
#Double-click on <span class="button">Network</span>.
Line 5: Line 4:
 
#In the <span class="button">Network Services</span> box, check for <span class="button">Remote Access</span>.
 
#In the <span class="button">Network Services</span> box, check for <span class="button">Remote Access</span>.
 
#:<div class="messagebox metadata">'''Note''': If you DO see <span class="button">Remote Access</span> in the <span class="button">Network Services</span> box, highlight it, click <span class="button">Properties</span>, and jump to step 9.</div>
 
#:<div class="messagebox metadata">'''Note''': If you DO see <span class="button">Remote Access</span> in the <span class="button">Network Services</span> box, highlight it, click <span class="button">Properties</span>, and jump to step 9.</div>
−
#:http://www.xmission.com/help/screenshots/winnt/winnt09.gif
+
#[[Image:Winnt09.png]]
 
#Click <span class="button">Add</span>.
 
#Click <span class="button">Add</span>.
 
#Scroll down to <span class="button">Remote Access Service</span> and highlight it.
 
#Scroll down to <span class="button">Remote Access Service</span> and highlight it.
 
#Click <span class="button">OK</span>.
 
#Click <span class="button">OK</span>.
−
#:http://www.xmission.com/help/screenshots/winnt/winnt10.gif
+
#[[Image:Winnt10.png]]
 
#Insert the Windows NT disk and click <span class="button">Continue</span>.
 
#Insert the Windows NT disk and click <span class="button">Continue</span>.
 
#Select your modem from the menu.
 
#Select your modem from the menu.
 
#Click <span class="button">OK</span>.
 
#Click <span class="button">OK</span>.
−
#:http://www.xmission.com/help/screenshots/winnt/winnt11.gif
+
#[[Image:Winnt11.png]]
 
#Click <span class="button">Configure</span>.
 
#Click <span class="button">Configure</span>.
−
#:http://www.xmission.com/help/screenshots/winnt/winnt12.gif
+
#[[Image:Winnt12.png]]
 
#Select <span class="button">Dial out only</span>.
 
#Select <span class="button">Dial out only</span>.
 
#Click <span class="button">OK</span>.
 
#Click <span class="button">OK</span>.
−
#:http://www.xmission.com/help/screenshots/winnt/winnt13.gif
+
#[[Image:Winnt13.png]]
 
#Click <span class="button">Network</span>.
 
#Click <span class="button">Network</span>.
 
#Make sure <span class="button">TCP/IP</span> is the only protocol selected.
 
#Make sure <span class="button">TCP/IP</span> is the only protocol selected.
 
#Click <span class="button">OK</span>.
 
#Click <span class="button">OK</span>.
−
#:http://www.xmission.com/help/screenshots/winnt/winnt14.gif
+
#[[Image:Winnt14.png]]
 
#Click <span class="button">Continue</span>.
 
#Click <span class="button">Continue</span>.
 
#Click <span class="button">Close</span>.
 
#Click <span class="button">Close</span>.
Line 29: Line 28:
  
 
[[Category:Dialup Archives|RAS]]
 
[[Category:Dialup Archives|RAS]]
−
 
−
 
−
{{footer}}
 

Revision as of 09:46, 9 June 2009

  1. Click Start, go to Settings, and select Control Panel.
  2. Double-click on Network.
  3. Select the Services tab.
  4. In the Network Services box, check for Remote Access.
    Note: If you DO see Remote Access in the Network Services box, highlight it, click Properties, and jump to step 9.
  5. Winnt09.png
  6. Click Add.
  7. Scroll down to Remote Access Service and highlight it.
  8. Click OK.
  9. Winnt10.png
  10. Insert the Windows NT disk and click Continue.
  11. Select your modem from the menu.
  12. Click OK.
  13. Winnt11.png
  14. Click Configure.
  15. Winnt12.png
  16. Select Dial out only.
  17. Click OK.
  18. Winnt13.png
  19. Click Network.
  20. Make sure TCP/IP is the only protocol selected.
  21. Click OK.
  22. Winnt14.png
  23. Click Continue.
  24. Click Close.
    Note: Windows NT will update your Bindings Configuration, and then prompt you to reboot your computer. You must reboot.
  25. Click Yes to reboot your computer.
Retrieved from "http://wiki.xmission.com/index.php?title=Installing_RAS_in_NT&oldid=2936"