DSL Actiontec Password Update: Difference between revisions

From XMission Wiki
Jump to navigation Jump to search
← Older editNewer edit →
pull from archives
(No difference)

Revision as of 16:15, 12 February 2009

  1. Open a Web browser. (Such as Internet Explorer or Mozilla)
  2. In the Addresss bar enter http://192.168.0.1.
    Note: If you have a subnet the address you need to enter is http:// followed by the IP address of your Actiontec. If you do not know what the IP address is please feel free to contact us.
    http://www.xmission.com/help/screenshots/actiontec/actiontec-pass-02.jpg
  3. Select Setup / Configuration.
    http://www.xmission.com/help/screenshots/actiontec/actiontec-pass-03.jpg
  4. Click Alternative Setup.
    Older Actiontec firmwares say Non-Windows Setup
    http://www.xmission.com/help/screenshots/actiontec/actiontec-pass-04.jpg
  5. Erase the contents of the ISP Password field and enter your new password.
    http://www.xmission.com/help/screenshots/actiontec/actiontec-pass-06.jpg
  6. Scroll to the bottom of the page and click Save and Restart.

At this point the configuration for your Actiontec is complete. Shortly after the Internet light on your Actiontec becomes solid you should be able to access the Internet.


Retrieved from "https://wiki.xmission.com/index.php?title=DSL_Actiontec_Password_Update&oldid=2213"