Difference between revisions of "DSL Actiontec Password Update"
From XMission Wiki
m |
m |
||
| Line 1: | Line 1: | ||
#Open a Web browser. (Such as Internet Explorer or Mozilla) | #Open a Web browser. (Such as Internet Explorer or Mozilla) | ||
#In the <span class="button">Addresss</span> bar enter <tt>http://192.168.0.1</tt>. | #In the <span class="button">Addresss</span> bar enter <tt>http://192.168.0.1</tt>. | ||
| − | #:<div class="messagebox metadata">'''Note''': If you have a subnet the address you need to enter is <tt>http://</tt> followed by the IP address of your Actiontec. If you do not know what the IP address is please feel free to [ | + | #:<div class="messagebox metadata">'''Note''': If you have a subnet the address you need to enter is <tt>http://</tt> followed by the IP address of your Actiontec. If you do not know what the IP address is please feel free to [http://www.xmission.com/about/contact/ contact us]. </div> |
#:[[Image:actiontec-pass-02.jpg]] | #:[[Image:actiontec-pass-02.jpg]] | ||
#Select <span class="button">Setup / Configuration</span>. | #Select <span class="button">Setup / Configuration</span>. | ||
Revision as of 13:52, 23 March 2009
- Open a Web browser. (Such as Internet Explorer or Mozilla)
- In the bar enter http://192.168.0.1.
- Select .
- Click .
- Older Actiontec firmwares say
- Erase the contents of the field and enter your new password.
- Scroll to the bottom of the page and click .
At this point the configuration for your Actiontec is complete. Shortly after the Internet light on your Actiontec becomes solid you should be able to access the Internet.
