Difference between revisions of "Netgear"
(Created page with '===Netgear PPPoE Proceedure=== Default IP: 192.168.0.1 Default Username: admin Default Password: password Select: Basic Settings Under "Does Your Internet Connection Re…') |
|||
| Line 1: | Line 1: | ||
===Netgear PPPoE Proceedure=== | ===Netgear PPPoE Proceedure=== | ||
| + | :''Before you begin, ensure that an Ethernet cable is connected from the Internet port on your router to the appropriately provisioned port on your UTOPIA equipment. Also, as wireless settings do not come pre-configured, you may need to connect your computer directly to one of the numbered LAN ports on your router with an Ethernet cable.'' | ||
| + | |||
| + | |||
| + | Once you've completed the preliminary steps above, open any web browser (for example, Internet Explore, Mozilla Firefox, Google Chrome, etc...) and remove any website in the address bar of your browser and type in "192.168.0.1" (without the quotation marks). ''Please note: the address bar is the bar you would use to directly access websites. This will not work if you enter these numbers in a search bar.'' | ||
| + | |||
| + | |||
| + | :Hit enter on your keyboard or click the appropriate button to progress to the site. Your browser may update to show "http://192.168.0.1" or "https://192.168.0.1." This is normal. | ||
| + | : | ||
| + | |||
| + | :If the connection between your computer and your router is successful, you will be prompted to enter a username and password. The default username and password for Netgear devices are as follows: | ||
| + | : | ||
| + | :Username: admin | ||
| + | :Password: password | ||
| + | |||
| + | |||
| + | Once logged in, click on "Basic Settings" below the "Setup" heading as indicated below: | ||
| + | |||
| + | [[File:1netgear.png]] | ||
| + | |||
| + | |||
| + | :Select "Yes" beneath the question "Does Your Internet Connection Require a Login?" | ||
| + | : | ||
| + | :[[File:2netgear.png]] | ||
| + | |||
| + | |||
| + | |||
| + | For "Internet Service Provider" select "Other." Where it asks for your "Login," enter your XMission username. In the example below, we have used "xmission_username." You would replace this with your own, unique XMission username. Where it asks for password, enter the corresponding password for your XMission username. The "Service Name" field can be left blank and you will likely want to change the "Idle Timeout" field to "0." | ||
| + | |||
| + | [[File:3netgear.png]] | ||
| + | |||
| + | |||
| + | :You're almost done. Scroll to the bottom of the page and click "Apply." | ||
| + | : | ||
| + | :After your router returns you to the setup screen, your Internet connection is ready for use! | ||
Revision as of 15:10, 8 November 2012
Netgear PPPoE Proceedure
- Before you begin, ensure that an Ethernet cable is connected from the Internet port on your router to the appropriately provisioned port on your UTOPIA equipment. Also, as wireless settings do not come pre-configured, you may need to connect your computer directly to one of the numbered LAN ports on your router with an Ethernet cable.
Once you've completed the preliminary steps above, open any web browser (for example, Internet Explore, Mozilla Firefox, Google Chrome, etc...) and remove any website in the address bar of your browser and type in "192.168.0.1" (without the quotation marks). Please note: the address bar is the bar you would use to directly access websites. This will not work if you enter these numbers in a search bar.
- Hit enter on your keyboard or click the appropriate button to progress to the site. Your browser may update to show "http://192.168.0.1" or "https://192.168.0.1." This is normal.
- If the connection between your computer and your router is successful, you will be prompted to enter a username and password. The default username and password for Netgear devices are as follows:
- Username: admin
- Password: password
Once logged in, click on "Basic Settings" below the "Setup" heading as indicated below:
- Select "Yes" beneath the question "Does Your Internet Connection Require a Login?"
For "Internet Service Provider" select "Other." Where it asks for your "Login," enter your XMission username. In the example below, we have used "xmission_username." You would replace this with your own, unique XMission username. Where it asks for password, enter the corresponding password for your XMission username. The "Service Name" field can be left blank and you will likely want to change the "Idle Timeout" field to "0."
- You're almost done. Scroll to the bottom of the page and click "Apply."
- After your router returns you to the setup screen, your Internet connection is ready for use!
Default IP: 192.168.0.1
Default Username: admin
Default Password: password
Select: Basic Settings
Under "Does Your Internet Connection Require A Login?" select: Yes
Input: Login | Password
Set "Idle Timeout" to: 0
Select: Apply
