DSL Actiontec Subnet Setup: Difference between revisions

From XMission Wiki
Jump to navigation Jump to search
← Older editNewer edit →
Mfrazier (talk | contribs)
1,345 edits
Mfrazier (talk | contribs)
1,345 edits
mNo edit summary
Line 26: Line 26:
{{footer}}
{{footer}}


[[Category:DSL Archive]]
[[Category:DSL Archives|Actiontec Subnet Setup]]
[[Category:DSL]]
[[Category:DSL|Actiontec Subnet Setup]]

Revision as of 13:40, 13 March 2008


  1. Open up a web browser and go to 
    http://192.168.0.1
  2. Click on Setup / Configuration in the Actiontec menu.
    http://www.xmission.com/help/screenshots/actiontec/Enter-Address.gif
  3. Click on Advanced Setup.
    http://www.xmission.com/help/screenshots/actiontec/Setup.gif
  4. Click the Begin Advanced Setup button.
    http://www.xmission.com/help/screenshots/actiontec/Advanced1.gif
  5. Click on LAN IP Address.
    http://www.xmission.com/help/screenshots/actiontec/Advanced2.gif
  6. Type in your LAN IP Address (The second IP address of the subnet).
  7. Select NAT.
    http://www.xmission.com/help/screenshots/actiontec/Advanced-lan.gif
  8. Select Off for NAT.
  9. Select Next.
    http://www.xmission.com/help/screenshots/actiontec/Advanced-nat.gif
  10. Type in the first IP of your subnet in Subnet IP.
  11. Type in your Subnet Mask in Subnet Mask.
  12. Leave the Gateway IP blank.
  13. Select Next.
    http://www.xmission.com/help/screenshots/actiontec/Advanced-route.gif
Note: At this point the configuration for your Actiontec is complete. Shortly after the Internet light on your Actiontec becomes solid you should be able to access the Internet.
Retrieved from "https://wiki.xmission.com/index.php?title=DSL_Actiontec_Subnet_Setup&oldid=1243"