DSL Actiontec 1520/1524 Setup: Difference between revisions

From XMission Wiki
Jump to navigation Jump to search
← Older editNewer edit →
Mfrazier (talk | contribs)
1,345 edits
mNo edit summary
remove from archives fix category
Line 1: Line 1:
{{Archived}}
XMission Recommends keeping your Actiontec up to date. Read here for more info on how to [[update your actiontec]].
XMission Recommends keeping your Actiontec up to date. Read here for more info on how to [[update your actiontec]].


Line 24: Line 22:


{{footer}}
{{footer}}
[[Category:DSL Archives|Actiontec 1520/1524]]
[[Category:Actiontec|DSL]]

Revision as of 16:57, 12 February 2009

XMission Recommends keeping your Actiontec up to date. Read here for more info on how to update your actiontec.


  1. Launch the Autorun program from the install CD (if it does not AutoRun).
  2. Follow the instructions on the screen untill it asks you to select an ISP protocol.
  3. Select PPPoA under Please select ISP protocol.
  4. Click Next.
    http://www.xmission.com/help/screenshots/actiontec/bdy-prot.jpg
  5. Type your XMission username under User ID.
  6. Type your XMission password under Password.
  7. Click Next.
    http://www.xmission.com/help/screenshots/actiontec/bdy-act.jpg
  8. Select Dynamic IP (DHCP).
  9. Click Next.
    http://www.xmission.com/help/screenshots/actiontec/bdy-ip.jpg
  10. Click Finish.
    http://www.xmission.com/help/screenshots/actiontec/bdy-done.jpg
Note: At this point the configuration for your Actiontec is complete. Shortly after the Internet light on your Actiontec becomes solid you should be able to access the Internet.

Remember, if you ever change your XMission password, you'll need to update your password in the Actiontec] as well. If you purchased a multiple IP block, you may configure it now

Retrieved from "https://wiki.xmission.com/index.php?title=DSL_Actiontec_1520/1524_Setup&oldid=2199"