Difference between revisions of "FreePPP 2.5 Setup"

Revision as of 17:19, 18 July 2007

Mac FreePPP 2.5 Setup

1. Open your Apple menu, go to Control Panels, and select FreePPP.
2. Click on the small blue arrow on the bottom left of the window to show the configuration tabs.
3. Uncheck every option under General.

   http://www.xmission.com/help/screenshots/macos/macfree251.gif

4. Click Modem Setup....
5. Make sure the only boxes checked are Modem speaker on while connecting and Hangup on disconnect.
6. Click OK.

   http://www.xmission.com/help/screenshots/macos/macfree252.gif

7. Click on the Accounts tab.
8. If you don't see your area listed, click New....

   Note: If you do see your area listed, select it and click Edit.... Some of the steps that follow will already be completed for you.

   http://www.xmission.com/help/screenshots/macos/macfree253.gif

9. In the Server name: field, enter XMission.
10. Enter the phone number for the XMission location you will be dialing in the Phone number: field.

    Note: Do not click Dial area code or Dial as long distance unless you are intentionally calling a location that isn't a local call. XMission is not responsible for long distance charges.

11. In the menu next to Connect:, select Directly.
12. In the field labeled User name:, enter your XMission account name.
13. In the field labeled Password:, enter your XMission password. You can leave this blank if you'd like to be prompted for your password when you connect.

    Note: Your account name and password are case-sensitive.

    http://www.xmission.com/help/screenshots/macos/macfree254.gif

14. Click on the Connection tab.
15. Note: These settings should be left as default. However, if you have a Global Village modem, Flow Control: needs to be set to CTS.
16. Click on OK.

    http://www.xmission.com/help/screenshots/macos/macfree255.gif