DSL 2Wire 2700HG Single IP Setup

1. Enter 192.168.0.1 in the address bar of your web browser to open the home page for your 2-Wire DSL modem. Then, select the Advanced Configuration Settings link in the lower-right corner.

   http://www.xmission.com/help/screenshots/2wire/2wire1.png

2. Select your Time Zone from the drop-down.
3. Select the radio button next to PPP Mode.
4. In the Connection Type drop-down list, select PPPoA then enter your XMission username and password in the spaces provided.

   http://www.xmission.com/help/screenshots/2wire/2wire2.png

5. Scroll to the bottom of the page and click Save.

Your DSL modem should display a green light on Internet. Your configuration is complete.

---

http://wiki.xmission.com/images/1/17/Contact.png

http://wiki.xmission.com/images/7/78/Contribute.png

http://wiki.xmission.com/images/b/bd/Archives.png