DSL Actiontec 1520/1524 Setup

From XMission Wiki
Revision as of 14:28, 15 January 2014 by Jab (talk | contribs)
Jump to: navigation, search
  1. Launch the Autorun program from the install CD (if it does not AutoRun).
  2. Follow the instructions on the screen untill it asks you to select an ISP protocol.
  3. Select PPPoA under Please select ISP protocol.
  4. Click Next.
    Bdy-prot.jpg
  5. Type your XMission username under User ID.
  6. Type your XMission password under Password.
  7. Click Next.
    Bdy-act.jpg
  8. Select Dynamic IP (DHCP).
  9. Click Next.
    Bdy-ip.jpg
  10. Click Finish.
    Bdy-done.jpg
Note: At this point the configuration for your Actiontec is complete. Shortly after the Internet light on your Actiontec becomes solid you should be able to access the Internet.

Remember, if you ever change your XMission password, you'll need to update your password in the Actiontec] as well. If you purchased a multiple IP block, you may configure it now

Retrieved from "http://wiki.xmission.com/index.php?title=DSL_Actiontec_1520/1524_Setup&oldid=5817"