DSL 2Wire 2700HG Single IP Setup

From XMission Wiki
Jump to: navigation, search

Archives.png


  1. Enter 192.168.0.1 in the address bar of your web browser to open the home page for your 2-Wire DSL modem. Then, select the Advanced Configuration Settings link in the lower-right corner.
    2wire1.png
  2. Select your Time Zone from the drop-down.
  3. Select the radio button next to PPP Mode.
  4. In the Connection Type drop-down list, select PPPoA then enter your XMission username and password in the spaces provided.
    2wire2.png
  5. Scroll to the bottom of the page and click Save.


Your DSL modem should display a green light on Internet. Your configuration is complete.