Difference between revisions of "DSL 2Wire 2700HG Single IP Setup"

From XMission Wiki
Jump to: navigation, search
(new page)
 
Line 1: Line 1:
 
#Enter <tt>192.168.0.1</tt> in the address bar of your web browser to open the home page for your 2-Wire DSL modem.  Then, select the <span class="button">Advanced Configuration Settings</span> link in the lower-right corner.  
 
#Enter <tt>192.168.0.1</tt> in the address bar of your web browser to open the home page for your 2-Wire DSL modem.  Then, select the <span class="button">Advanced Configuration Settings</span> link in the lower-right corner.  
#:http://www.xmission.com/help/screenshots/2wire/2wire_1.png
+
#:http://www.xmission.com/help/screenshots/2wire/2wire1.png
 
#Select your Time Zone from the drop-down.
 
#Select your Time Zone from the drop-down.
 
#Select the radio button next to ''PPP Mode''.
 
#Select the radio button next to ''PPP Mode''.

Revision as of 15:00, 12 September 2007

  1. Enter 192.168.0.1 in the address bar of your web browser to open the home page for your 2-Wire DSL modem. Then, select the Advanced Configuration Settings link in the lower-right corner.
    http://www.xmission.com/help/screenshots/2wire/2wire1.png
  2. Select your Time Zone from the drop-down.
  3. Select the radio button next to PPP Mode.
  4. In the Connection Type drop-down list, select PPPoA then enter your XMission username and password in the spaces provided.
    http://www.xmission.com/help/screenshots/2wire/2wire_2.png
  5. Scroll to the bottom of the page and click Save.
    http://www.xmission.com/help/screenshots/2wire/2wire_3.png

Your DSL modem should display a green light on Internet. Your configuration is complete.