Difference between revisions of "DSL Actiontec Subnet Setup"

From XMission Wiki
Jump to: navigation, search
Line 23: Line 23:
  
  
−
[[Category:Troubleshooting|DSL]]
+
 
−
[[Category:DSL Configuration|Actiontec Subnet Setup]]
+
[[Category:DSL Troubleshooting|Actiontec Subnet Setup]]
 
[[Category:DSL]]
 
[[Category:DSL]]
 
[[Category:PPPoA]]
 
[[Category:PPPoA]]

Revision as of 15:31, 15 January 2014

  1. Open up a web browser and go to 
    http://192.168.0.1
  2. Click on Setup / Configuration in the Actiontec menu.
    Enter-Address.png
  3. Click on Advanced Setup.
    File:Setup.png
  4. Click the Begin Advanced Setup button.
    Advanced1.png
  5. Click on LAN IP Address.
    Advanced2.png
  6. Type in your LAN IP Address (The second IP address of the subnet).
  7. Select NAT.
    Advanced-lan.png
  8. Select Off for NAT.
  9. Select Next.
    Advanced-nat.png
  10. Type in the first IP of your subnet in Subnet IP.
  11. Type in your Subnet Mask in Subnet Mask.
  12. Leave the Gateway IP blank.
  13. Select Next.
    Advanced-route.png
Note: At this point the configuration for your Actiontec is complete. Shortly after the Internet light on your Actiontec becomes solid you should be able to access the Internet.
Retrieved from "http://wiki.xmission.com/index.php?title=DSL_Actiontec_Subnet_Setup&oldid=5823"