DSL Actiontec Subnet Setup

From XMission Wiki
Revision as of 18:56, 18 July 2007 by Deadguy (talk | contribs) (New page: #Open up a web browser and go to <pre>http://192.168.0.1</pre> #Click on <span class="button">Setup / Configuration</span> in the Actiontec menu. #:http://www.xmission.com/help/screenshots...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  1. Open up a web browser and go to 
    http://192.168.0.1
  2. Click on Setup / Configuration in the Actiontec menu.
    http://www.xmission.com/help/screenshots/actiontec/Enter-Address.gif
  3. Click on Advanced Setup.
    http://www.xmission.com/help/screenshots/actiontec/Setup.gif
  4. Click the Begin Advanced Setup button.
    http://www.xmission.com/help/screenshots/actiontec/Advanced1.gif
  5. Click on LAN IP Address.
    http://www.xmission.com/help/screenshots/actiontec/Advanced2.gif
  6. Type in your LAN IP Address (The second IP address of the subnet).
  7. Select NAT.
    http://www.xmission.com/help/screenshots/actiontec/Advanced-lan.gif
  8. Select Off for NAT.
  9. Select Next.
    http://www.xmission.com/help/screenshots/actiontec/Advanced-nat.gif
  10. Type in the first IP of your subnet in Subnet IP.
  11. Type in your Subnet Mask in Subnet Mask.
  12. Leave the Gateway IP blank.
  13. Select Next.
    http://www.xmission.com/help/screenshots/actiontec/Advanced-route.gif
Note: At this point the configuration for your Actiontec is complete. Shortly after the Internet light on your Actiontec becomes solid you should be able to access the Internet.
Retrieved from "http://wiki.xmission.com/index.php?title=DSL_Actiontec_Subnet_Setup&oldid=104"