OpenTransport Setup

From XMission Wiki
Revision as of 18:21, 18 July 2007 by Deadguy (talk | contribs) (New page: OpenTransport/PPP Setup #Click on the Apple menu, go to <span class="button">Control Panels</span>, and select <span class="button">PPP</span>. #Select <span class="button">Registered U...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

OpenTransport/PPP Setup

  1. Click on the Apple menu, go to Control Panels, and select PPP.
  2. Select Registered User.
  3. In the field labeled Name:, enter your XMission username.
  4. In the field labeled Password:, enter your XMission password.
    Note: If you do not wish to enter your password every time you connect,check the Save password box.
  5. In the Number: field, enter your local XMission access number.
    An area code is only neccessary if the number you choose is not local to you. Long distance charges may apply. Heber residents always need to use an area code to reach the Provo/Orem/Heber number, but are not charged long distance fees.
  6. Click on Options.
    http://www.xmission.com/help/screenshots/macos/macotppp1.gif
  7. Select the Redialing tab.
  8. Select Redial main number only.
  9. Enter 50 in Redial ___ times..
  10. In the field next to Time between retries:, enter 5.
    http://www.xmission.com/help/screenshots/macos/macotppp2.gif
  11. Select the Connection tab.
  12. Check Use verbose logging.
    Note: The rest of the options on this tab are for your own personal preference. If you're unsure, uncheck them all.
    http://www.xmission.com/help/screenshots/macos/macotppp3.gif
  13. Select the Protocol tab.
  14. Beside Use protocol:, select PPP from the menu.
  15. Uncheck all options except Allow error correction and compression in modem..
  16. Click on OK.
Retrieved from "http://wiki.xmission.com/index.php?title=OpenTransport_Setup&oldid=84"