Difference between revisions of "WRT54GL Multiple IP Setup"

From XMission Wiki
Jump to: navigation, search
(New page: #Connect the Ethernet cable from the UTOPIA Access Portal to the internet port on your Linksys WRT54GL. #Connect an Ethernet cable from the Ethernet port on your computer to one of the lan...)
 
m
Line 1: Line 1:
 +
{{utopiaheader}}
 
#Connect the Ethernet cable from the UTOPIA Access Portal to the internet port on your Linksys WRT54GL.
 
#Connect the Ethernet cable from the UTOPIA Access Portal to the internet port on your Linksys WRT54GL.
 
#Connect an Ethernet cable from the Ethernet port on your computer to one of the lan ports on your Linksys WRT54GL.
 
#Connect an Ethernet cable from the Ethernet port on your computer to one of the lan ports on your Linksys WRT54GL.
Line 10: Line 11:
 
#Click the <span class="button">Save Settings</span> button at the bottom.
 
#Click the <span class="button">Save Settings</span> button at the bottom.
 
#:http://www.xmission.com/help/screenshots/linksys/wrt54glsubnet1.png
 
#:http://www.xmission.com/help/screenshots/linksys/wrt54glsubnet1.png
 +
 +
 +
 +
{{footer}}
 +
[[Category:UTOPIA|WRT54GL Multiple IP Setup]]

Revision as of 21:45, 18 March 2008

Utopiaheader.png


  1. Connect the Ethernet cable from the UTOPIA Access Portal to the internet port on your Linksys WRT54GL.
  2. Connect an Ethernet cable from the Ethernet port on your computer to one of the lan ports on your Linksys WRT54GL.
  3. Open your web browser, you will most likely get an XMission Welcome screen. In the address bar, type 192.168.1.1 and press the Enter key on your keyboard. When prompted for the username and password, leave the username field blank and enter admin for the password.
  4. In the Internet Connection Type drop down box, select PPPoE.
  5. In the User Name field, enter your XMission user name.
  6. In the Password field, enter your XMission password.
    http://www.xmission.com/help/screenshots/linksys/wrt54glsubnet.png
  7. Click the Advanced Routing link in the upper right corner.
  8. In the Operating Mode drop down box, select Router mode.
  9. Click the Save Settings button at the bottom.
    http://www.xmission.com/help/screenshots/linksys/wrt54glsubnet1.png