Difference between revisions of "WRT54GL Multiple IP Setup"

From XMission Wiki
Jump to: navigation, search
(New page: #Connect the Ethernet cable from the UTOPIA Access Portal to the internet port on your Linksys WRT54GL. #Connect an Ethernet cable from the Ethernet port on your computer to one of the lan...)
 
 
(8 intermediate revisions by 5 users not shown)
Line 5: Line 5:
 
#In the ''User Name'' field, enter your XMission user name.
 
#In the ''User Name'' field, enter your XMission user name.
 
#In the ''Password'' field, enter your XMission password.
 
#In the ''Password'' field, enter your XMission password.
#:http://www.xmission.com/help/screenshots/linksys/wrt54glsubnet.png
+
#In the ''Local IP Address'' field, enter your first usable IP from your subnet.
 +
#[[Image:Wrt54glsubnet.png]]
 
#Click the <span class="button">Advanced Routing</span> link in the upper right corner.
 
#Click the <span class="button">Advanced Routing</span> link in the upper right corner.
 
#In the ''Operating Mode'' drop down box, select <tt>Router</tt> mode.
 
#In the ''Operating Mode'' drop down box, select <tt>Router</tt> mode.
 
#Click the <span class="button">Save Settings</span> button at the bottom.
 
#Click the <span class="button">Save Settings</span> button at the bottom.
#:http://www.xmission.com/help/screenshots/linksys/wrt54glsubnet1.png
+
#[[Image:Wrt54glsubnet1.png]]
 +
 
 +
 
 +
 
 +
 
 +
[[Category:UTOPIA]]
 +
[[Category:UTOPIA Troubleshooting|WRT54GL Multiple IP Setup]]

Latest revision as of 11:52, 16 January 2014

  1. Connect the Ethernet cable from the UTOPIA Access Portal to the internet port on your Linksys WRT54GL.
  2. Connect an Ethernet cable from the Ethernet port on your computer to one of the lan ports on your Linksys WRT54GL.
  3. Open your web browser, you will most likely get an XMission Welcome screen. In the address bar, type 192.168.1.1 and press the Enter key on your keyboard. When prompted for the username and password, leave the username field blank and enter admin for the password.
  4. In the Internet Connection Type drop down box, select PPPoE.
  5. In the User Name field, enter your XMission user name.
  6. In the Password field, enter your XMission password.
  7. In the Local IP Address field, enter your first usable IP from your subnet.
  8. Wrt54glsubnet.png
  9. Click the Advanced Routing link in the upper right corner.
  10. In the Operating Mode drop down box, select Router mode.
  11. Click the Save Settings button at the bottom.
  12. Wrt54glsubnet1.png