Difference between revisions of "Windows Vista"

From XMission Wiki
Jump to: navigation, search
Line 40: Line 40:
 
:Go to the "Connections" tab and ensure that the connection you just created is listed in the box labeled "Dial-up and Virtual Private Network settings" and that it is set as the default. If it is not set as default, highlight the connection and hit the "Set default" button located near the bottom of the window. We recommend choosing the second option, "Dial whenever a network connection is not present," by placing a bullet in the circle beside it. After that, click "Ok."
 
:Go to the "Connections" tab and ensure that the connection you just created is listed in the box labeled "Dial-up and Virtual Private Network settings" and that it is set as the default. If it is not set as default, highlight the connection and hit the "Set default" button located near the bottom of the window. We recommend choosing the second option, "Dial whenever a network connection is not present," by placing a bullet in the circle beside it. After that, click "Ok."
  
:[[File:09pppoe-vista-09.png]]
+
:[[File:9pppoe-vista-09.png]]
  
 
Your Internet connection is not ready to use!
 
Your Internet connection is not ready to use!

Revision as of 13:50, 9 November 2012

Windows Vista PPPoE procedure:

Before you begin, ensure that an Ethernet cable is connected from the appropriately provisioned port on your UTOPIA equipment to your computer.

Click the Windows icon Windows icon.png on your task bar. This will pop up a menu, as seen below. Click on "Control Panel."

1pppoe-vista-01.png


Click on "Network and Internet."
2pppoe-vista-02.png


Below the heading "Network and Sharing Center" click "Connect to a network."

3pppoe-vista-03.png


When prompted with your connection options, select "Connect to the Internet."
4pppoe-vista-04.png


When asked how you would like to connect, select the "Broadband (PPPoE)" option."

5pppoe-vista-05.png


Enter your XMission username and corresponding password. In the example below, we have used "bobdobbs" as a username. You would replace this with your own, unique XMission username. Remember that passwords are case-sensitive! You may name the connection whatever you like, but we recommend you simply use "XMission." You will also likely want to check the two boxes indicated below -- "Remember this password" and "Allow other people to use this connection." Once finished, click "Connect."
6pppoe-vista-06.png


One last step you may want to take is to return to your "Control Panel" as indicated in the steps above. This time, select "Internet Options."

8pppoe-vista-08.png


Go to the "Connections" tab and ensure that the connection you just created is listed in the box labeled "Dial-up and Virtual Private Network settings" and that it is set as the default. If it is not set as default, highlight the connection and hit the "Set default" button located near the bottom of the window. We recommend choosing the second option, "Dial whenever a network connection is not present," by placing a bullet in the circle beside it. After that, click "Ok."
9pppoe-vista-09.png

Your Internet connection is not ready to use!