Difference between revisions of "UTOPIA Setup"
m |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 11: | Line 11: | ||
XMission highly recommends the | XMission highly recommends the | ||
[https://www.amazon.com/gp/product/B00PDLRHFW/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=xmis-20&creative=9325&linkCode=as2&creativeASIN=B00PDLRHFW&linkId=8b7e7216d5e02546b8347cb383f8bb81 TP-Link Archer C9] | [https://www.amazon.com/gp/product/B00PDLRHFW/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=xmis-20&creative=9325&linkCode=as2&creativeASIN=B00PDLRHFW&linkId=8b7e7216d5e02546b8347cb383f8bb81 TP-Link Archer C9] | ||
| + | |||
| + | Additional router suggestions can be found here: https://wiki.xmission.com/Router_and_Wireless_Troubleshooting#Recommended_Routers | ||
| + | |||
<br> | <br> | ||
| − | <h2> | + | <h2>Router configurations</h2> |
*[[Linksys]] | *[[Linksys]] | ||
*[[Netgear]] | *[[Netgear]] | ||
Latest revision as of 13:24, 19 July 2019
Contents
DHCP Connection
Most customers will be set to DHCP for easy access and connection to the internet. Your IP will not change unless you switch devices or are disconnected from the internet for a long period of time. You will not need to do anything special in your router configuration.
PPPoE Connection
Utopia customers using a static IP or a subnet will need to use a PPPoE connection. This gives you a static IP. Your router will need to be reconfigured to accept a username and password. It will be the username you set up with XMission.
These easy to follow instructions will help you configure your favorite routers and operating systems for use with your PPPoE connection.
- Note: Routers may have slightly different user interfaces depending on the model.
XMission highly recommends the TP-Link Archer C9
Additional router suggestions can be found here: https://wiki.xmission.com/Router_and_Wireless_Troubleshooting#Recommended_Routers
