Difference between revisions of "DSL Actiontec Subnet Setup"

Revision as of 15:38, 7 March 2008

1. Open up a web browser and go to

   http://192.168.0.1

2. Click on Setup / Configuration in the Actiontec menu.

   http://www.xmission.com/help/screenshots/actiontec/Enter-Address.gif

3. Click on Advanced Setup.

   http://www.xmission.com/help/screenshots/actiontec/Setup.gif

4. Click the Begin Advanced Setup button.

   http://www.xmission.com/help/screenshots/actiontec/Advanced1.gif

5. Click on LAN IP Address.

   http://www.xmission.com/help/screenshots/actiontec/Advanced2.gif

6. Type in your LAN IP Address (The second IP address of the subnet).
7. Select NAT.

   http://www.xmission.com/help/screenshots/actiontec/Advanced-lan.gif

8. Select Off for NAT.
9. Select Next.

   http://www.xmission.com/help/screenshots/actiontec/Advanced-nat.gif

10. Type in the first IP of your subnet in Subnet IP.
11. Type in your Subnet Mask in Subnet Mask.
12. Leave the Gateway IP blank.
13. Select Next.

    http://www.xmission.com/help/screenshots/actiontec/Advanced-route.gif