Difference between revisions of "DSL 2Wire 2700HG Multiple IP Setup"

Revision as of 11:26, 10 March 2009

1. Enter 192.168.0.1 in the address bar of your web browser to open the 2-Wire home page. Select Advanced Configuration Settings link in the lower right corner.

   http://www.xmission.com/help/screenshots/2wire/2wiresubnet_1.png

2. Select your Time Zone from the drop-down.
3. Select the radio button next to PPP Mode.
4. In the Connection Type drop-down list, select PPPoA then enter your XMission username and password in the spaces provided.

   http://www.xmission.com/help/screenshots/2wire/2wiresubnet_2.png

5. Under the Addressing area, select Unnumbered Mode.
6. In the Gateway IP Address field, enter the first usable IP address in the subnet assigned to you.
7. In the Subnet Mask field, enter the subnet mask you were given.

   http://www.xmission.com/help/screenshots/2wire/2wiresubnet_3.png

8. Scroll down the page to the DNS Server area.
9. Select the Specify DNS Server Settings radio button and enter 198.60.22.2 for the Primary DNS and 198.60.22.22 in the Secondary DNS field. Then click Save.

   http://www.xmission.com/help/screenshots/2wire/2wiresubnet_4.png

10. Click on Home. Then click on the Home Network image.

    http://www.xmission.com/help/screenshots/2wire/2wiresubnet_5.png

11. From Home Network click on Advanced Settings

    Note: Ensure that the machine you want to specify the public IP to is connected successfully to the 2wire modem.

12. In the Device List section, click on Edit Address Allocation
13. Find the correct computer or device you are attempting to map a static IP address to. Select DHCP Public: <public ip address> from the drop down menu next to the device.

    http://www.xmission.com/help/screenshots/2wire/2wiresubnet_6.png

14. After you have finished assigning all the devices you would like to have static IPs, click on Save.
15. After saving changes to the Address Allocation Settings, ensure the device you assigned the address to is utilizing DHCP to lease an address.

    Note: From here on you can use the built-in Firewall to forward ports to the device(s).

Your DSL modem should now display a green light on Internet. Your configuration is complete.