Difference between revisions of "UTOPIA Setup"
From XMission Wiki
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
<h1>DHCP Connection</h1> | <h1>DHCP Connection</h1> | ||
| − | Most | + | Most customers will be set to DHCP for easy access and connection to the internet. Your IP will change from time to time. You will not need to do anything special in your router configuration. |
<br> | <br> | ||
<h1>PPPoE Connection</h1> | <h1>PPPoE Connection</h1> | ||
Utopia customers using a static IP or a subnet will need to use a PPPoE connection. This give you a static IP as well as your router will need to be reconfigured to accept a Username and Password. | Utopia customers using a static IP or a subnet will need to use a PPPoE connection. This give you a static IP as well as your router will need to be reconfigured to accept a Username and Password. | ||
| + | These easy to follow instructions will help you configure your favorite routers and operating systems for use with your PPPoE connection. | ||
<br> | <br> | ||
<h2>Routers</h2> | <h2>Routers</h2> | ||
Revision as of 12:25, 3 September 2014
DHCP Connection
Most customers will be set to DHCP for easy access and connection to the internet. Your IP will change from time to time. You will not need to do anything special in your router configuration.
PPPoE Connection
Utopia customers using a static IP or a subnet will need to use a PPPoE connection. This give you a static IP as well as your router will need to be reconfigured to accept a Username and Password.
These easy to follow instructions will help you configure your favorite routers and operating systems for use with your PPPoE connection.
