Installing TCP/IP in 95/98

From XMission Wiki
Revision as of 20:48, 19 March 2008 by Mfrazier (talk | contribs) (Protected "Dialup Archives:Installing TCP/IP in 95/98" [edit=sysop:move=sysop])
Jump to: navigation, search

Archives.png

  1. Click Start, go to Settings, and select Control Panel.
  2. Double-click on Network.
    http://www.xmission.com/help/screenshots/win95/win957.gif
    Note: If you see TCP/IP (may also say TCP/IP -> Dial-up Adapter), you will need to click once on TCP/IP and then click Remove.
    http://www.xmission.com/help/screenshots/win95/win958.gif
  3. Click Add.
  4. Select Protocol.
  5. Click Add.
  6. On the left, below Manufacturers:, select Microsoft.
  7. On the right, below Network Protocols:, select TCP/IP.
  8. Click OK, then OK again.
    Note: You may be prompted to insert your Win95/98 disk(s).
  9. When prompted to restart, click Yes.
]
Retrieved from "http://wiki.xmission.com/index.php?title=Installing_TCP/IP_in_95/98&oldid=1660"