DSL 2Wire 2700HG Multiple IP Setup

1. Enter 192.168.0.1 in the address bar of your web browser to open the 2-Wire home page. Select Advanced Configuration Settings link in the lower right corner.

   http://www.xmission.com/help/screenshots/2wire/2wiresubnet_1.png

2. Select your Time Zone from the drop-down.
3. Select the radio button next to PPP Mode.
4. In the Connection Type drop-down list, select PPPoA then enter your XMission username and password in the spaces provided.

   http://www.xmission.com/help/screenshots/2wire/2wiresubnet_2.png

5. Under the Addressing area, select Unnumbered Mode.
6. In the Gateway IP Address field, enter the first usable IP address in the subnet assigned to you.
7. In the Subnet Mask field, enter the subnet mask you were given.

   http://www.xmission.com/help/screenshots/2wire/2wiresubnet_3.png

8. Scroll down the page to the DNS Server area.
9. Select the Specify DNS Server Settings radio button and enter 198.60.22.2 for the Primary DNS and 198.60.22.22 in the Secondary DNS field. Then click Save.

   http://www.xmission.com/help/screenshots/2wire/2wiresubnet_4.png

Your DSL modem should now display a green light on Internet. Your configuration is complete.