Installing TCP/IP in 95/98

From XMission Wiki
Revision as of 17:38, 18 July 2007 by Deadguy (talk | contribs) (New page: #Click <span class="button">Start</span>, go to <span class="button">Settings</span>, and select <span class="button">Control Panel</span>. #Double-click on <span class="button">Network</s...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  1. Click Start, go to Settings, and select Control Panel.
  2. Double-click on Network.
    http://www.xmission.com/help/screenshots/win95/win957.gif
    Note: If you see TCP/IP (may also say TCP/IP -> Dial-up Adapter), you will need to click once on TCP/IP and then click Remove.
    http://www.xmission.com/help/screenshots/win95/win958.gif
  3. Click Add.
  4. Select Protocol.
  5. Click Add.
  6. On the left, below Manufacturers:, select Microsoft.
  7. On the right, below Network Protocols:, select TCP/IP.
  8. Click OK, then OK again.
    Note: You may be prompted to insert your Win95/98 disk(s).
  9. When prompted to restart, click Yes.
Retrieved from "http://wiki.xmission.com/index.php?title=Installing_TCP/IP_in_95/98&oldid=98"