Difference between revisions of "About FTP and Shared Hosting"

From XMission Wiki
Jump to: navigation, search
 
(59 intermediate revisions by 8 users not shown)
Line 1: Line 1:
−
= Plesk Unlimited Hosting: About FTP and Unlimited Hosting =
+
= Plesk Shared Hosting: About FTP and Shared Hosting =
  
  
−
*'''What is FTP?'''
+
==What is FTP?==
  
−
FTP (File Transfer Protocol) is a protocol used to transfer files over a TCP/IP network (Internet, UNIX, etc.). For example, after developing the HTML pages for a website on a local machine, they are typically uploaded to the Web server using FTP.
+
The File Transfer Protocol or FTP, is a protocol used to transfer files over a TCP/IP network (Internet, UNIX, etc.). For example, after developing the HTML pages for a website on a local machine, the new files are typically uploaded to the Web server using FTP.
  
−
FTP includes functions to log onto the network, list directories, and copy files. FTP operations can be performed by typing commands at a command prompt or via an FTP client running under a graphical interface such as Windows.  
+
FTP includes functions to log onto the network, list directories, and copy files. FTP operations can be performed by typing commands at a command prompt or via an FTP client running under a graphical interface such as Windows.
  
−
'''We highly recommend using an FTP client, such as Filezilla which is available at http://filezilla-project.org/'''.
+
'''We highly recommend using an FTP client, such as [http://filezilla-project.org/ Filezilla.]'''
  
−
As there are many FTP clients out there, the interface for each will differ slightly. The screenshots used in the instructions below are from Filezilla but '''the basic settings should be the same no matter what FTP client you choose'''.  
+
As there are many FTP clients out there, the interface for each will differ slightly. The screenshots used in the instructions below are from Filezilla but '''the basic settings should be the same no matter what FTP client you choose'''.
  
 +
==Secure FTP Methods==
  
 +
'''FTPS''' (also known FTP-SSL, and FTP Secure) is an extension to the commonly used File Transfer Protocol (FTP) that adds support for the Transport Layer Security (TLS) and, formerly, the Secure Sockets Layer (SSL, which is now prohibited by RFC7568) cryptographic protocols.
  
−
*'''How does FTP work with my Unlimited Hosting?'''
+
'''Explicit FTPS''' is an extension to the FTP standard that allows clients to request FTP sessions to be encrypted. This is done by sending the "AUTH TLS" command. The server has the option of allowing or denying connections that do not request TLS. This protocol extension is defined in RFC 4217. '''Implicit FTPS''' is an outdated standard for FTP that required the use of a SSL or TLS connection. It was specified to use different ports than plain FTP.
  
−
FTP is the recommended way to upload the files you have created for your website to our server. In general, FTP, both as a command-line function and as utility, is more reliable than uploading files via your web browser. It is also a useful tool in making files available to friends, family, or clients without sending bulky attachments via email.
+
The SSH File Transfer Protocol (or '''SFTP''') transfers files and has a similar command set for users, but uses the Secure Shell Protocol (SSH) to transfer files. Unlike FTP, it encrypts both commands and data, preventing passwords and sensitive information from being transmitted openly over the network.
  
−
*'''How do I connect to XMission's Plesk Unlimited Hosting FTP server?'''
+
'''NOTE''': For added security and to protect against vulnerabilities, XMission only supports authenticated encryption. Using the most current SFTP client will ensure you are connecting to your server and our network with the highest security.
  
−
We recommend using Smart FTP](PC), or Fetch(Mac), which are GUI clients that make using FTP easier and more user-friendly. Most FTP clients require this basic information: Site Label = XMission
+
XMission supports the following, in order of preference:
 +
* '''Ciphers''': chacha20-poly1305@openssh.com, aes128-gcm@openssh.com, and aes256-gcm@openssh.com
 +
* '''MACs''': hmac-sha2-256-etm@openssh.com, hmac-sha2-512-etm@openssh.com, hmac-sha2-256, and hmac-sha2-512.
 +
* '''KexAlgs''': curve25519-sha256@libssh.org, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, and diffie-hellman-group-exchange-sha256.
  
−
:'''Host Address''' = <tt>ftp.xmission.com</tt> (or ftp://ftp.xmission.com)
+
==How does FTP work with my Shared Hosting?==
−
:'''UserID or Username''' = <tt>username</tt> (Your XMission username.)
 
−
:'''Password''' = <tt>password</tt> (Your XMission password.)
 
  
−
Another way to connect is to use your browser. Most versions of Netscape, Internet Explorer, and other browsers, such as Mozilla, will allow  you to connect to an FTP server using the following format:
+
FTP is the recommended way to upload the files you have created for your website to our server. In general, FTP, both as a command-line function and as utility, is more reliable than uploading files via your web browser. This is because does it not have many restrictions on file sizes that web browsers have, in addition to the FTP client being able to better handle interrupted connections to avoid data corruptions. It is also a useful tool in making files available to friends, family, or clients without sending bulky attachments via email.
  
−
<pre>ftp://username:password@ftp.xmission.com/</pre>
+
==How do I connect to XMission's Plesk Shared Hosting FTP server via an FTP Client?==
  
−
You would, of course, replace "username" with your XMission account  name, and "password" with your XMission password.
+
Every FTP client has a slightly different interface. However, the three pieces below are typically all that is necessary to create an FTP connection:
  
−
==How do I connect to XMission's FTP server with a secure connection?==
+
:'''Host Address''' = Most commonly your domain with the “ftp.” prefix. Example: ftp.yourdomain.com
−
This is the basic information for most clients
+
:'''UserID or Username''' = Either the same username used at hosting.xmission.com or a custom one created later. For more information on creating and managing FTP users, please see [[Managing_FTP_Access/Users]]
−
:'''Host Address''' = <tt>shell.xmission.com</tt>
+
:'''Password''' = Your FTP password for the primary username can sometimes be the same as the hosting.xmission.com password, but '''is not inherently'''. For more information on creating and managing FTP user passwords, please see [[Managing_FTP_Access/Users]]
−
:'''UserID or Username''' = <tt>username</tt> (Your XMission username.)
+
:'''Port''' = Our servers will not accept plain text authentication, so you will want to use port 22 with SFTP primarily. If you are having issues connecting over this port, use FTPS with Explicit SSL over port 21 is also accepted.
−
:'''Password''' = <tt>password</tt> (Your XMission password.)
 
−
:'''Port''' = <tt>22</tt>
 
−
If you are using a Terminal Window with Mac, Windows or Linux:
 
−
:'''In you terminal window type'''  <tt>sftp yourusername@shell.xmission.com</tt> (yourusername = Your XMission username)
 
  
−
==How can I make my files available to others?==
+
For example, using Filezilla, a common connection would look like this, where ''ftp.yourdomain.tld'' is the example host and ''username'' is the example username:
  
−
When you connect to the FTP server and you're in your home directory,  you should see a directory named FTP. In this directory, you can create  a folder named "outgoing". Be sure the permissions are group readable,  or chmod 755. You can put your files in this directory and give people  the following URL for access:
+
'''NOTE:''' If your nameservers are not pointing to XMission, please use the IP address for your shared server for your host name. This can be found in your ''Websites and Domains'' tab.
  
−
<pre>ftp://ftp.xmission.com/pub/users/u/username/outgoing/filename</pre>
+
[[File:Filezilla ftp updated.png]]
  
−
You would replace "u" with the first letter of your account name,  "username" with your XMission username, and "filename" with the  name of the file you are referring people to (or you can leave off  the file name and let them browse the directory).
 
  
−
==How can I have others send files to me via FTP?==
 
  
−
Much the same as explained above, you can create a directory named  "incoming" in your FTP directory. Make sure this directory is NOT readable and is group writable, or chmod 733. You can give people  the following URL for access:
+
*If you are connecting to a server for the first time, Filezilla will ask you to confirm the connection.  Simply click '''OK''' to progress.
  
−
<pre>ftp://ftp.xmission.com/pub/users/u/username/incoming</pre>
+
[[File:Filezilla OK button.png]]
  
−
You would replace "u" with the first letter of your account name,  "username" with your XMission username.
 
  
  
−
==Why is XMission's FTP server slow or even unavailable  at times?==
+
*Once the connection is complete, you will see both the local site (your computer or device) and the remote site (the web server).
  
−
Speed depends on when you use it. During prime time, you sometimes  share our FTP server with up to 100 of other Internet users around  the world. This can be heavy load for the machine. Because of the  high load this can cause, there is a limit of 100 simultaneous connections  on the FTP server. Though it's rare, you may have to wait a couple  of minutes to use it.  
+
[[File:FTP_connect2.png]]
  
  
−
==What are some common mistakes?==
+
*In most cases, the root folder for your website is going to ''httpdocs'' and you will want to upload the files for your website to this directory. This can be done a variety of ways. You can select the files you want to upload, and right click them for uploading options, or you can also simply drag them to the remote site and folder you would like them to be uploaded to.
  
−
One common mistake is not setting proper file read permissions. This  includes restricting everyone from retrieving those files, and leaving  directories with world writable and world readable flags set. These  directories often end up as trading grounds for software pirates.  Also, you should occasionally check any incoming directories for files  someone may have dropped for you, and clean up old unneeded files.  
+
[[File:FTP_connect3.png]]
  
−
Another common mistake is attempting to upload hidden files. FTP will not allow you to upload a file with a "." preceding the file name.
+
==SFTP doesn't work for me. How do I connect over FTPS?==
 +
If for some reason you are not able to connect with SFTP over port 22, there is the option to connect with FTPS over port 21.  These instructions are specific for Filezilla, but the settings themselves should work in any client.
 +
 
 +
*First, open up the Site Manager.
 +
 
 +
[[File:Filezilla connection manager.png]]
 +
 
 +
 
 +
*In here, click on '''New Site'''.
 +
 
 +
[[File:Filezilla connection manager new site.png]]
 +
 
 +
 
 +
*This will allow you to edit the connection details for a new site.  Input your credentials (username, password, host name), and otherwise match the settings to what you see below.
 +
 
 +
[[File:Filezilla connection manager ftps settings.png]]
 +
 
 +
*Once you're all done, click '''Connect'''.
 +
 
 +
 
 +
{{:Shared_Hosting}}
 +
[[Category:Shared Hosting|FTP and Shared Hosting]]

Latest revision as of 22:55, 7 December 2022

Plesk Shared Hosting: About FTP and Shared Hosting

What is FTP?

The File Transfer Protocol or FTP, is a protocol used to transfer files over a TCP/IP network (Internet, UNIX, etc.). For example, after developing the HTML pages for a website on a local machine, the new files are typically uploaded to the Web server using FTP.

FTP includes functions to log onto the network, list directories, and copy files. FTP operations can be performed by typing commands at a command prompt or via an FTP client running under a graphical interface such as Windows.

We highly recommend using an FTP client, such as Filezilla.

As there are many FTP clients out there, the interface for each will differ slightly. The screenshots used in the instructions below are from Filezilla but the basic settings should be the same no matter what FTP client you choose.

Secure FTP Methods

FTPS (also known FTP-SSL, and FTP Secure) is an extension to the commonly used File Transfer Protocol (FTP) that adds support for the Transport Layer Security (TLS) and, formerly, the Secure Sockets Layer (SSL, which is now prohibited by RFC7568) cryptographic protocols.

Explicit FTPS is an extension to the FTP standard that allows clients to request FTP sessions to be encrypted. This is done by sending the "AUTH TLS" command. The server has the option of allowing or denying connections that do not request TLS. This protocol extension is defined in RFC 4217. Implicit FTPS is an outdated standard for FTP that required the use of a SSL or TLS connection. It was specified to use different ports than plain FTP.

The SSH File Transfer Protocol (or SFTP) transfers files and has a similar command set for users, but uses the Secure Shell Protocol (SSH) to transfer files. Unlike FTP, it encrypts both commands and data, preventing passwords and sensitive information from being transmitted openly over the network.

NOTE: For added security and to protect against vulnerabilities, XMission only supports authenticated encryption. Using the most current SFTP client will ensure you are connecting to your server and our network with the highest security.

XMission supports the following, in order of preference:

  • Ciphers: chacha20-poly1305@openssh.com, aes128-gcm@openssh.com, and aes256-gcm@openssh.com
  • MACs: hmac-sha2-256-etm@openssh.com, hmac-sha2-512-etm@openssh.com, hmac-sha2-256, and hmac-sha2-512.
  • KexAlgs: curve25519-sha256@libssh.org, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, and diffie-hellman-group-exchange-sha256.

How does FTP work with my Shared Hosting?

FTP is the recommended way to upload the files you have created for your website to our server. In general, FTP, both as a command-line function and as utility, is more reliable than uploading files via your web browser. This is because does it not have many restrictions on file sizes that web browsers have, in addition to the FTP client being able to better handle interrupted connections to avoid data corruptions. It is also a useful tool in making files available to friends, family, or clients without sending bulky attachments via email.

How do I connect to XMission's Plesk Shared Hosting FTP server via an FTP Client?

Every FTP client has a slightly different interface. However, the three pieces below are typically all that is necessary to create an FTP connection:

Host Address = Most commonly your domain with the “ftp.” prefix. Example: ftp.yourdomain.com
UserID or Username = Either the same username used at hosting.xmission.com or a custom one created later. For more information on creating and managing FTP users, please see Managing_FTP_Access/Users
Password = Your FTP password for the primary username can sometimes be the same as the hosting.xmission.com password, but is not inherently. For more information on creating and managing FTP user passwords, please see Managing_FTP_Access/Users
Port = Our servers will not accept plain text authentication, so you will want to use port 22 with SFTP primarily. If you are having issues connecting over this port, use FTPS with Explicit SSL over port 21 is also accepted.

For example, using Filezilla, a common connection would look like this, where ftp.yourdomain.tld is the example host and username is the example username:

NOTE: If your nameservers are not pointing to XMission, please use the IP address for your shared server for your host name. This can be found in your Websites and Domains tab.

Filezilla ftp updated.png


  • If you are connecting to a server for the first time, Filezilla will ask you to confirm the connection. Simply click OK to progress.

Filezilla OK button.png


  • Once the connection is complete, you will see both the local site (your computer or device) and the remote site (the web server).

FTP connect2.png


  • In most cases, the root folder for your website is going to httpdocs and you will want to upload the files for your website to this directory. This can be done a variety of ways. You can select the files you want to upload, and right click them for uploading options, or you can also simply drag them to the remote site and folder you would like them to be uploaded to.

FTP connect3.png

SFTP doesn't work for me. How do I connect over FTPS?

If for some reason you are not able to connect with SFTP over port 22, there is the option to connect with FTPS over port 21. These instructions are specific for Filezilla, but the settings themselves should work in any client.

  • First, open up the Site Manager.

Filezilla connection manager.png


  • In here, click on New Site.

Filezilla connection manager new site.png


  • This will allow you to edit the connection details for a new site. Input your credentials (username, password, host name), and otherwise match the settings to what you see below.

Filezilla connection manager ftps settings.png

  • Once you're all done, click Connect.


Additional Development Help

Applications

Domain Management

Retrieved from "http://wiki.xmission.com/index.php?title=About_FTP_and_Shared_Hosting&oldid=11353"